Skip to content
Alumtech

Installation

Hanging a framed glass door

Ships assembled, with glass and hinges fitted.

Cutout drawing

ABCutout 1Cutout 2Carcass side
Schematic, not to scale. Cutout size and position to be confirmed.
Cutout sizeTo be confirmed
A · Top of carcass to cutout 1To be confirmed
B · Cutout 2 to base of carcassTo be confirmed
Door widthTo be confirmed
Door heightTo be confirmed

Install sequence

  1. 01 · Set out with the jig

    Set out both cutouts and the six screws with the jig.

  2. 02 · Make the two cutouts

    Make the two cutouts in the carcass to the set-out.

  3. 03 · Fix the six screws

    Hang the door and fix it with the six screws.

  4. 04 · Adjust the door

    Soft close, with 3-way adjustment. Adjust the hinges until the door sits true.

The jig

±1 mm

Two cutouts and six screws, set out with the jig to ±1 mm.

A free MDF jig comes with every order.

The jig template is in the downloads.

Install animation

The install animation is coming. Until then, the install sequence above shows each step.

Downloads

The install files are not published yet. Browse the specifier library

Questions before the first cut?

Ask about the set-out, the jig or an awkward carcass.

Talk to Alumtech